AEM - ATE Testers ( former Mutest)

Optimized Performance

MuTest is a new comer (with strong experience) in the ATE market with mission to address the Cost Of Test (COT) challenges faced by all the IC Semiconductor Companies.

MuTest systems are very well suited for complex SOC testing – including digital, mixed signal & memory (DDR2 up to DDR3)

MuTest offers a comprehensive set of test solutions – with 2 types of platforms:

…in which one can integrate multiples instruments:

  • MTD864 : The MTD864 is a 800Mbps, 64 channels digital tester on a single instrument ….
  • MTMIXW : The MTMIXWaves is the multi-channel Mixed Signal instrument to address the test challenges of the Audio and Video SOC devices…
  • MTDPS10 : The MTDPS10 provides many very flexible VI combinations to power any IC devices…
  • MTCBitmap : The MTCBitmap is a module of the MT800 family. It performs a full memory error bitmapping during a functional test at 800Mbps…

More instruments can be available (high frequency time analyzer, high frequency pulse generator, larger data rate, more pin counts, etc…) – please contact us for more information

MuTest ATE base systems

MT5S 5 slots

The MT5S is a full ATE machine designed to be used for the validation and characterization process.

With its very compact form factor , its very low power consumption the MT5S is air cooled and can be run within the Engineer’s office.

The MT5S can accommodate any of the MuTest instruments portfolio in any slot.

– 5 Slots electro-mechanical structure
– Air cooled systemt
– 5 Slots Pogo Frame
– Calibration & Diagnostics loadboard
– MTGTW Tester Interface: 1G Ethernet, +5, +15, – 15 Volts user power supply, utility bits
– < 600 Watts fully loaded

MT5S 5 slots

MT19S 19 slots

The MT19S is a full ATE machine designed to test complex SOC and memory devices used today ,widely, in the consumer market.

With its very compact form factor , its very low power consumption the MT19S is positioned to be the lowest Cost Of Test in the ATE world today.

The MT19S can accommodate any of the MuTest instruments portfolio in any slot.

– 19 Slots electro-mechanical structure
– Air cooled system
– 19 Slots Pogo Frame
– Calibration & Diagnostics loadboard
– MTGTW Tester Interface: 1G Ethernet, +5, +15, – 15 Volts user power supply, utility bits
– < 3 kWatts fully loaded

Parallel implementation can also increase capabilities to adapte to your needs.

Open architecture & Ease of use software

  • Using ATE industry standard: STIL, STDF
  • Import data from existing STIL files: signals, timing, levels
  • LabVIEW interface
  • Import any test parameters from CSV

Instruments

MT864

The MTD864 is a 800Mbps, 64 channels digital tester on a single instrument

Description Designed for SOC and Memory testing, the MTD864 supports many mode of operations and data distribution:
– Up to 1Gbit chain can be applied on any pin, allowing scan testing of complex devices,
– Source synchronous testing mode allows for accurate strobing of memory controllers or devices,
– Hardware Subroutine and APG allows for complex pattern generation,

Debug of your device is facilitated with the optional CBitmap module which implements either 32Mbit of capture memory or a true Bitmap providing you with the failing memory cells
The 1Gbps dual Driver Comparator Load interfaces with any single ended or differential technology. Fast and accurate parametric test and characterization are performed through the embedded PmuPP.

Its FPGA based technology insures you a ROI on multiple DUT generation as well as implementation of proprietary protocol or access.

Key Features

– 64 channels @ 800Mbps
– 4K Subroutine & APG Capability
– Scan Chain capability
– 1 Gb / 32MVector Memory per 32 channels
– 128 Mb Capture memory with 12.8 Gb/s bandwidth per 32 channels
– 2 additional free running clocks
– PMU per pin

MTDPS10

The MTDPS10 provides many very flexible VI combinations to power any IC devices

The MTDPS10 is a set of 4 quadrants DUT Power Supplies which combines 10 DPS on a single instrument with a mix of High Current and Medium current ranges to accommodate the various needs of IC applications.

In addition the 8 Medium current range DPS can be ganged to supply more current if necessary.

The instrument still has a power consumption of < 70W.

Key Features

– 8 * 800mA channels
– 2 * 5 A Channels
– Measure current, clamp current

MTCBitmap

The MTCBitmap performs a full memory error bitmapping during a functional test at 800Mbps

Designed for SOC, DDR1,2,3 and SRAM testing, it provides you with a full image of your failing memory cells. The data can then be computed for device repair or process analysis.

The module works in conjunction with the MTD864 module which provides 64 channels at 800Mbps. The memory test algorithm is calculated by the HW APG embedded inside the MTD864 controller. It is applied to the DUT through the channel controllers which return the individual Pin/Fdata status.

The X,Y,Z, data and PFail are then carried up to the Bitmap controller which performs Read/Modify/Write cycles at Full speed into the Bitmap memory.

Key Features

– 4 Gb Memory map, upgrade option @ 8 Gb
– Up to 64 bits wide databuses
– Full compatibility with digital instruments set
– < 100 Watts, air cooled

MTMIXW

The MTMIXWaves is the multi-channel Mixed Signal instrument to address the test challenges of the Audio and Video SOC devices

MTMixW performs MXSL test for embedded DAC/ADC or Audio/Video Features found in the SOC devices.

Its highly integrated features include 8 high performances channels and embedded DSP for parallel data analysis in a single low power instrument which could be used for characterization or high volume production. The “on-board” DSP per channel allows for very fast data computing and results contributing to the low cost of test.

Key Features

– 4 samplers with high accuracy or high frequency
– 4 AWG with high accuracy or high frequency
– 8 independent channels with individual time domain in a single slot for true parallel test
– Compatible with all electrical standards
– Synchronization with digital instruments or external trigger
– PMU

For more instruments, please contact us… we have a very open architecture & multiple other existing solutions

MT5S, MT19S, MTD864, MTDPS10, MTCBitmap, MTMIXW are ATE solutions from MuTest’s